Our Products

GATE VALVE

Model# UTGTV
Reference Standards

Design : ASME B16.34 / API 600
Face to Face : ASME B16.10
Flange : ASME B16.5 / ASME 16.47
Testing : API 598/EN 12666 Part 1
Pr & Temp Rating : ANSI B16.34

Design Features

Pressure Class: ASA 150#/300#
End Connection: Flanged End/ Screwed

Applications

Oil, Gas & Water Steam
Petrochemicals
Upto 400 ℃


Technical Specification
Body & Plug : ASTM A 216 Gr. WCB/ A351 Gr.CF8 / CF8M
Seat Ring : AISI SS304 / SS316 / 13%CR. / Stellite Deposition
Wedge : ASTM A216 Gr. WCB / A351 Gr. CF8 / CF8M 13%CR./Stellite Deposition
Spindle/Stem : AISI SS304 / SS316 / SS410
Gasket : SSPW / CAF
Bonnet : ASTM A216 Gr. WCB / A351 Gr. CF8 / CF8M
Bonnet Stud & Nut : ASTM A193 Gr. B7 / A194 Gr. 2H / B8.8
Gland Packing : Asbestos / Non Asbestos / PTFE / Graphoil
Gland Flange : ASTM A 216 Gr. WCB/ A351 Gr. CF8/CF8M
Hand Wheel : Cast Iron / Malleable Iron / Stainless Steel
Hand Wheel Nut : Carbon Steel / Stainless Steel

Types of Actuators

MANUAL

PNEUMATIC

MOTORIZED


Dimension (MM) 150#

NPS DN L H W PCD NO OF HOLES
2" 50 178 360 200 121 4
2-1/2" 65 190 425 220 140 4
3" 80 203 443 220 153 4
4" 100 229 577 250 191 8
6" 150 267 790 300 242 8
8" 200 292 1013 350 299 8
10" 250 330 1215 400 362 12
12" 300 356 1246 450 342 12
14" 350 381 1524 450 476 12
16" 400 406 1677 500 540 16
18" 450 432 1900 500 578 16
20" 500 457 2113 500 635 20
24" 600 508 2113 500 750 20

Dimension (MM) 300#

NPS DN L H W PCD NO OF HOLES
2" 50 216 368 220 127 8
2-1/2" 65 241 437 250 150 8
3" 80 282 485 250 169 8
4" 100 305 592 300 200 8
6" 150 403 815 400 270 12
8" 200 419 1053 450 331 12
10" 250 457 1260 450 388 16
12" 300 502 1260 450 451 16
14" 350 762 1600 450 515 20
16" 400 838 1849 600 572 20
18" 450 914 204 600 629 24
20" 500 991 2113 650 689 24
24" 600 1143 2410 650 813 24

Sailent Features

  • Rigid and Sturdy design with minimum loss of ahead across the valve.
  • Perfect Interchangeability of components.
  • Assured Parallelism of components.
  • Assured equal taper on both sides of the wedges.
  • Perfect Machining and pressing of body and wedge face ring.
  • Excellent finish on spindle threads resulting in low friction and smoother operation of valves.
  • Long service life and leak Tightness even after thousand of open/closed cycles.